100% Employee Owned, Founded 1954

Flow Meter Calibration

Flow Meter Calibration Services

Flow meters offer an important measure of fluid quantities in equipment ranging from gasoline pumps to food and beverage production machinery. When products or materials are valued based on gas or fluid quantity, it’s important to have a calibrated flow meter, as they often act as a cash register for your operation.

Cross is your one stop shop for a range of flow meter calibration services. We offer in-lab ISO 17025 accredited calibration of mass flow controllers and mass flow meters using our Fluke Molbloc system with NIST traceable master testing standards. Additionally, our liquid flow meter calibration partners procedures utilize either gravimetric flow methods, or direct comparison methods with our certified variable area flow meters.

Our experienced technicians report all NIST traceable data on a calibration certificate which is then available 24/7 within GageSuite®, our cloud based calibration management system.

Expert Inspection and Calibration for Flowmeters

Make Cross your one-stop shop for all your thermal mass flow controller and meter needs. Our team of flow experts can help you through all stages of your equipment’s life cycle from purchasing new equipment to routine maintenance, as well as repair and eventual replacement. Services include:

Verification of thermal mass flow meters and controllers

ISO 17025 Calibration

Cleaning and reconditioning

Repair and rebuilding

Retrofits and upgrades

Consulting and specifying new equipment to meet your particular application

Substance and Flow Measurement Services

Substance and flow measurement equipment need to be working at peak performance in order to meet a variety of regulatory requirements, keep productivity high, and maintain profitability. In fact, incorrectly reading flow measurement devices can (and do) cause major problems in both the short and long term for operations that rely on accurate flow readings or substance measurement. Whether you’re in municipal services, pharmaceuticals, or manufacturing, if you regularly utilize substance and flow measurement equipment, it will require regular calibration.

At Cross Precision Measurement, our full-service, ISO 17025 accredited local calibration labs and on-site calibration techs use NIST traceable equipment. Meaning we’re able to calibrate your substance and flow measurement devices or instrumentation with traceable and reliable accuracy. From air samplers to flow meters to pipettes, our lab calibration services for flow measurement assure your industrial tools, equipment, or instrumentation is calibrated to recognized standards.

Whenever we perform calibration services for flow instruments, we also always provide extensive documentation of the calibration procedure, how we found the device, how we left the device, and provide recommendations for when the device would be up for recalibration. That way all of our clients have the documentation they need for a calibration audit, internal quality check, or inspection from a regulatory body.

Cross specializes in a wide range of calibration services for substance and flow devices. We’ve worked with countless forms of flow equipment and our technicians have the knowledge and experience to bring our customers the world-class precision measurement services they deserve.

Mass Flow Controllers

Dry Gas Flow Meters

Variable Area Flow Meters

Mass Flow Meters

Rotameters

Cross is proud to be an Authorized Brooks’ Service Partner

Let us help you with your gas flow calibration needs. Cross has partnered with Brooks Instrument to be their Authorized Service Partner in the Southeast. Our team has years of calibration and flow expertise to help you ensure your equipment is performing at its best!

Flow Meter Calibration 1
Flow Meter Calibration 2

See how our team can help improve quality, increase efficiency, and reduce risk.

Inventory Tracking, Certificates of Calibration, and More

Cross Precision Measurement is proud to offer all of our flow calibration customers access to our own calibration report storage and calibration service tracking software, GageSuite. GageSuite is an award-winning, cloud-based reporting and inventory management system to keep track of your calibration schedule, documentation, and the location of your equipment.

Whether it’s As Found, As Left reports, certificates of calibration, or reminders of when recalibration should be scheduled, GageSuite provides our customers with a comprehensive calibration management and inventory tracking system. Through GageSuite, you can access calibration certificates, equipment calibration status, and the locations of tracked equipment. All available in real-time 24/7/365.

We’ve seen that with GageSuite, our customers miss less calibrations, limit production disruption, lower expenditures, and increase accountability within their operations. Always know your substance and flow equipment calibration status with Cross. GageSuite offers; Equipment Location, Certificates of Calibration, Order Status, Calibration Schedules, And More.

cross gagesuite calibration tracking software

See why customers love GageSuite, our award winning cloud based calibration management system.

Nearby Substance and Flow Calibration Company

With our modern, fully-equipped calibration laboratories, on-site calibration techs, and embedded services, Cross Precision Measurement is ready to be your nearby % calibration company. But that’s not all we want to be. We aim to be a single-source provider for our customers. That means providing the services, products, and support they need to succeed.

Whether it’s calibrating a centrifuge or providing truck scale services, when you need metrology services, think Cross. Contact us today and we’ll work directly with you to devise product-based, service-based, or solution-based plans to make the best of your production process.

Why Cross Precision Measurement?

Cross is Brooks’ Exclusive Authorized Service Partner in the Southeast and Mid-Atlantic. This means that our team has undergone extensive training from the manufacturer. We utilize the same equipment that Brooks’ technicians would use, and have years of calibration expertise. In addition, our team is located in the region, so we can quickly service your equipment to minimize downtime. Finally, process solutions and precision measurement teams at Cross have literally hundreds of years of combined expertise with flow equipment such as thermal mass flow controllers and meters. We know the products inside and out. If you have a question or an issue, we’re positive we can help!

Do you have a large number of flow meters? It may be more cost effective to consider a calibration service contract.

Ready to begin the calibration process? Please download and complete our repair and decontamination form and email it to us today.

Flow Meter Calibration 3

J.A. King is Now Cross Precision Measurement!

Same team, same expertise. Since 1939, the precision measurement professionals at J.A. King have been your trusted measurement partner; providing accuracy, reliability, and efficiency to let you focus on what you do best. That same team is now the Precision Measurement Group at Cross. Learn more about our history.

J.A. King Headquarters

Find Flow Meter Calibration Near Me

Previous
Next

See how our team can help improve quality, increase efficiency, and reduce risk.

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet to paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are a 100% employee owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.