100% Employee Owned, Founded 1954

Anemometer Calibration

Anemometer Calibration Services

Anemometers are measurement devices used to determine velocity or wind speed. Types range from traditional cup anemometers and vane anemometers which act like fans or wind mills, to ultrasonic and acoustic resonance anemometers which take measurements based on indirect characteristics such as sound or vibrations.

Cross Precision Measurement is able to provide calibration services for a wide range of anemometers, such as wind speed indicators, vane type anemometers, portable anemometers, hot-wire anemometers, and others. We’re able to precisely measure calibration status of anemometers using wind tunnels and other traceable calibration methods. This allows us to provide the highest degree of accuracy possible for all of our customers.

Our state-of-the-art calibration labs are able to perform anemometer calibration procedures quickly and efficiently, with low turnaround times and high degrees of accuracy. If you’re regularly using an anemometer in your process, it will eventually require calibration. Cross can provide the professional calibration services you need while also offering resources to maintain your calibration accuracy.

Inspection and Calibration for Anemometers

The precision measurement group at Cross offers ISO 17025 accredited anemometer calibration by comparison against NIST traceable standards such as master anemometers and wind tunnels. In accordance with our anemometer calibration procedure, our technicians take readings at multiple test points across the range of the device.

Ensuring anemometer accuracy is about more than just calibration for a single component. For instance, any transducers or measuring equipment require traceable and certifiable calibrations with documented traceability. Also, pitot tubes used need to also be calibrated and documented for appropriate wind speed ranges. Reference anemometers are also used to verify calibration, and the repeatability of the entire process must also be taken into account.

Different cases may require different methods, but no matter what type of anemometer your operation is using, you need it to be reliable. And at Cross Precision Measurement, that’s what we provide. Our expert calibration services combined with our world-class customer service is one of the main reasons our customers keep utilizing our anemometer calibration services in their operations.

For more information about anemometer calibration or to get a quote for products and services, fill out our contact form to get in touch with a local Cross team member today!

Expert Substance and Flow Measurement Procedures

Substance and flow measurement equipment need to be working at peak performance in order to meet a variety of regulatory requirements, keep productivity high, and maintain profitability. In fact, incorrectly reading flow measurement devices can (and do) cause major problems in both the short and long term for operations that rely on accurate flow readings or substance measurement. Whether you’re in municipal services, pharmaceuticals, or manufacturing, if you regularly utilize substance and flow measurement equipment, it will require regular calibration.

At Cross Precision Measurement, our full-service, ISO 17025 accredited local calibration labs and on-site calibration techs use NIST traceable equipment. Meaning we’re able to calibrate your substance and flow measurement devices or instrumentation with traceable and reliable accuracy. From air samplers to flow meters to pipettes, our lab calibration services for flow measurement assure your industrial tools, equipment, or instrumentation is calibrated to recognized standards.

Whenever we perform calibration services for flow instruments, we also always provide extensive documentation of the calibration procedure, how we found the device, how we left the device, and provide recommendations for when the device would be up for recalibration. That way all of our clients have the documentation they need for a calibration audit, internal quality check, or inspection from a regulatory body.

Cross specializes in a wide range of calibration services for substance and flow devices. We’ve worked with countless forms of flow equipment and our technicians have the knowledge and experience to bring our customers the world-class precision measurement services they deserve.

Traceable to Master Standards

ISO17025 Accreditation

Wide Scope

On-Site and In-Lab Services

Certificates of Calibration, Inventory Tracking, and More

Cross Precision Measurement is proud to offer all of our flow calibration customers access to our own calibration report storage and calibration service tracking software, GageSuite®. GageSuite is an award-winning, cloud-based reporting and inventory management system to keep track of your calibration schedule, documentation, and the location of your equipment.

Whether it’s As Found, As Left reports, certificates of calibration, or reminders of when recalibration should be scheduled, GageSuite provides our customers with a comprehensive calibration management and inventory tracking system. Through GageSuite, you can access calibration certificates, equipment calibration status, and the locations of tracked equipment. All available in real-time 24/7/365.

We’ve seen that with GageSuite, our customers miss less calibrations, limit production disruption, lower expenditures, and increase accountability within their operations. Always know your substance and flow equipment calibration status with Cross. GageSuite offers; Equipment Location, Certificates of Calibration, Order Status, Calibration Schedules, And More.

cross gagesuite calibration tracking software

See why customers love GageSuite, our award winning cloud based calibration management system.

Local Substance and Flow Calibration Company

Cross anemometer calibration is designed for operations that need to accurately measure wind speed. This can include industrial HVAC, environmental protection and research, wind energy, mining, construction, and many others. But no matter what industry you’re in, you still should be able to trust the readings from you anemometers.

With our modern, fully-equipped calibration laboratories, on-site calibration techs, and embedded services, Cross Precision Measurement is ready to be your nearby anemometer calibration company. But that’s not all we want to be. We aim to be a single-source provider for our customers. That means providing the services, products, and support they need to succeed.

Whether it’s calibrating a centrifuge or providing truck scale services, when you need metrology services, think Cross. Contact us today and we’ll work directly with you to devise product-based, service-based, or solution-based plans to make the best of your production process.

Why Cross Precision Measurement?

Cross Precision Measurement has worked with a wide range of businesses across dozens of industries providing reliable calibration, inspection, testing, and instrumentation to our clients.

Our primary goal is to always be providing the best value to our customers, their manufacturing processes, and their end users. And the best way we know how to do that is by providing our customers with all the tools they need to succeed.

Whether it’s in the form of embedded calibration services, product testing, or metrology equipment, Cross can provide the precision measurement services you need.

Check out our other services or contact a precision measurement expert at Cross to get started today.

Find Anemometer Calibration Near Me

Previous
Next

See how our precision measurement team can help improve quality, increase efficiency, and reduce risk.

Anemometer Calibration 6

J.A. King is Now Cross Precision Measurement!

Same team, same expertise. Since 1939, the precision measurement professionals at J.A. King have been your trusted measurement partner; providing accuracy, reliability, and efficiency to let you focus on what you do best. That same team is now the Precision Measurement Group at Cross. Learn more about our history.

J.A. King Headquarters

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet to paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are a 100% employee owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.