Extend the life of your data center’s chillers with flow meters from Flexim Data center Chillers are a critical piece of infrastructure, as they prevent overheating which can cause damage and equipment failure. It’s not a surprise that in order to avoid these issues data center operators err on the…
How can Cross help with your aging equipment? As your process equipment begins to age it becomes harder to operate your facility. Finding technicians and engineers who are familiar with the equipment becomes difficult. Older equipment doesn’t work as efficiently or reliably as it once did and finding replacement parts…
Are your valves lasting a year or less in your application? If the answer to this question is “yes”, then you may have the wrong valve for your application. There are several critical factors to consider when selecting a valve. Selecting the right valve for your application conditions can help…
Why you should choose FLEXIM ultrasonic meters for data centers If you are looking for flow meters for your data center, you have a number of options. If you want the most accurate and least invasive flow meter, we suggest FLEXIM’s ultrasonic meter. This equipment has several advantages that are…
When you need a valve quickly, Cross is here to help! Finding the parts you need, when you need them can be tricky. With the current supply chain issues, it can often be months before the part you need will arrive. The world of valves is no exception, but Cross…
Industrial control valves are constantly moving and therefore will wear faster than an on/off block valve. They require more maintenance than block valves and can be very expensive to replace. Proper material selection, sizing and maintenance are crucial to extending the life of control valves. Pneumatic Control Valves Pneumatic Control…
As an integrator we are often brought into new projects later than what would be ideal, which results in the creation of additional work for the integrator and additional cost for the customer. If the OEM or custom equipment has already been spec’ed and ordered before engaging an integrator, there…
Commissioning For Process Controls: The Pursuit of Excellence There are so many control system platforms to choose from, it is hard to know what is right for your facility. To make matters more complex, you may also be debating whether or not to standardize platforms across your entire facility. While…
Top 10 Low Hanging Fruits to Pick for Process Improvement Before or After a Lean Audit This article was featured in Valve World Americas and was written to help any plant manager, maintenance supervisor, process engineer, or mechanical team shine. These may not be everyday ideas for you, but they…
Commissioning For Process Controls: The Pursuit of Excellence Commissioning is a team effort to document the continuity of a project as it moves from one project phase to the next. To achieve commissioning excellence requires that the testing documents be accurate and written in an orderly fashion. The Documentation Gatekeeper,…
The Preventative Maintenance Mindset: How to quantify the True Cost of Inaction Many of us have heard of lean initiatives such as predictive maintenance. Possibly in the past, you focused upon preventative maintenance, or even use to failure. Each of these have their good points and bad points. Today we’re…
Why migrate your process to a new control system? You have probably heard the old adage “if it’s not broke, don’t fix it.” While there are some great arguments for leaving well enough alone, it isn’t true for your control system. There can be serious advantages to moving your outdated…
