100% Employee Owned, Founded 1954

Pipette Calibration

Pipette Calibration Services

Pipettes are an integral part of daily laboratory activities. Pipette calibration drift and out of tolerance events are often invisible in pipetting but can have a substantial effect on results. Wear and tear on O-rings, residue on pistons, and barrier failures can all contribute to calibration and operation failure.

Cross offers both mail-in and even onsite options for pipette calibration service throughout many of our territories. In addition, multiple service level options allow our customers the convenience of selecting measurement parameters based on their certificate requirements.

If your operation is regularly using pipettes, eventually they will require calibration to ensure continued accuracy and performance. That’s something we can help with. Cross Precision Measurement has worked with many laboratories and other operations to providing expert pipette calibration procedures with certificates of calibration. And we can provide that same service to you, too.

Inspection and Calibration for Pipettes and Lab Equipment

If you’re looking for ISO 8655-6 pipette calibration, you’ve come to the right place. At Cross, we’re able to provide a wide range of services and solutions to ensure you have a calibrated pipette when you need one. Take a look at the following pipette calibration service options available with Cross:

Standard NIST Traceable Service: Includes checks at the test points of 100%, 50% and 10 % with a minimum of four samples per volume. This service level includes as found/as left data with certificate.

ISO 17025 Accredited NIST Traceable Service: Includes checks at the same test points as our standard NIST traceable service with a minimum of four samples per volume. This service level includes as found/as left data with certificate as well as calculated uncertainties.

ISO 8655 Compliant Service: Includes checks at the same test points as our ISO 17025 Accredited NIST Traceable service (however, with a minimum of 10 samples per volume). This service level includes as found/as left data with certificate.

ISO 8655 Compliant Service (With Uncertainties): Includes checks at the same test points as our ISO 17025 Accredited NIST Traceable service (however, with a minimum of 10 samples per volume). This service level includes as found/as left data with certificate, as well as calculated uncertainties.

Customer Specification NIST Traceable Service: For customers with custom SOP’s that require different test points and samples per volume.

Flow Measurement Services for Laboratories and More

Substance and flow measurement equipment need to be working at peak performance in order to meet a variety of regulatory requirements, keep productivity high, and maintain profitability. In fact, incorrectly reading flow measurement devices can (and do) cause major problems in both the short and long term for operations that rely on accurate flow readings or substance measurement. Whether you’re in municipal services, pharmaceuticals, or manufacturing, if you regularly utilize substance and flow measurement equipment, it will require regular calibration.

At Cross Precision Measurement, our full-service, ISO 17025 accredited local calibration labs and on-site calibration techs use NIST traceable equipment. Meaning we’re able to calibrate your substance and flow measurement devices or instrumentation with traceable and reliable accuracy. From air samplers to flow meters to pipettes, our lab calibration services for flow measurement assure your industrial tools, equipment, or instrumentation is calibrated to recognized standards.

Cross specializes in a wide range of calibration services for substance and flow devices. We’ve worked with countless forms of flow equipment and our technicians have the knowledge and experience to bring our customers the world-class precision measurement services they deserve.

Traceable to Master Standards

ISO17025 Accreditation

Wide Scope

On-Site and In-Lab Services

Inventory Tracking, Certificates of Calibration, and Calibration Status

Cross Precision Measurement is proud to offer all of our flow calibration customers access to our own calibration report storage and calibration service tracking software, GageSuite. GageSuite is an award-winning, cloud-based reporting and inventory management system to keep track of your calibration schedule, documentation, and the location of your equipment.

Whether it’s As Found, As Left reports, certificates of calibration, or reminders of when recalibration should be scheduled, GageSuite provides our customers with a comprehensive calibration management and inventory tracking system. Through GageSuite, you can access calibration certificates, equipment calibration status, and the locations of tracked equipment. All available in real-time 24/7/365.

We’ve seen that with GageSuite, our customers miss less calibrations, limit production disruption, lower expenditures, and increase accountability within their operations. Always know your substance and flow equipment calibration status with Cross. GageSuite offers; Equipment Location, Certificates of Calibration, Order Status, Calibration Schedules, And More.

cross gagesuite calibration tracking software

See why customers love GageSuite, our award winning cloud based calibration management system.

Nearby Substance and Flow Calibration Company

In addition to pipette calibration service, Cross offers maintenance and repair services for most models of pipettes. This includes everything from a simple pipette cleaning to a complete overhaul of equipment. Take a look at some of the pipette maintenance and repair offered:

Basic: Exterior Wipe Down with 70% Ethyl Alcohol and Distilled Water Flush ( Included with All Service )

Plus: Tip/Cone disassembly, clean all internal components with 70% Ethyl Alcohol, lubricate and reassemble.

Overhaul: Above cleaning process to include new seal kit. Only available in Cross lab*

With access to the latest measurement technology and technical expertise, you can ensure your equipment is operating accurately and efficiently with any level of our service. Let Cross keep your daily pipetting in check and in compliance, give us a call to learn about the benefits of our world class customer service and contact us today for a quote on pipette calibration services with Cross.

Whether it’s calibrating a centrifuge or providing truck scale services, when you need metrology services, think Cross. Contact us today and we’ll work directly with you to devise product-based, service-based, or solution-based plans to make the best of your production process.

Interested in pipette services with Cross? Take a look and fill out our pipette service request form to send in with your equipment

Why Cross Precision Measurement?

Cross Precision Measurement has worked with a wide range of businesses across dozens of industries providing reliable calibration, inspection, testing, and instrumentation to our clients.

Our primary goal is to always be providing the best value to our customers, their manufacturing processes, and their end users. And the best way we know how to do that is by providing our customers with all the tools they need to succeed.

Whether it’s in the form of embedded calibration services, product testing, or metrology equipment, Cross can provide the precision measurement services you need.

Check out our other services or contact a precision measurement expert at Cross to get started today.

Find Pipette Calibration Near Me

Previous
Next

See how our precision measurement team can help improve quality, increase efficiency, and reduce risk.

Pipette Calibration 6

J.A. King is Now Cross Precision Measurement!

Same team, same expertise. Since 1939, the precision measurement professionals at J.A. King have been your trusted measurement partner; providing accuracy, reliability, and efficiency to let you focus on what you do best. That same team is now the Precision Measurement Group at Cross. Learn more about our history.

J.A. King Headquarters

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet to paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are a 100% employee owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.