100% Employee Owned, Founded 1954

Balance Calibration

Balance and Scale Calibration Services

As a leader in the precision measurement industry since 1939, Cross offers years of expertise when it comes to balance calibration. We rely on our laboratory balances every day to be accurate and repeatable. When you weigh ingredients for a batch of solution today, you expect that the weighed amount of chemicals & buffering agents to be the same as those weighed six months ago. Batch to batch variation can have profound impacts on experimental results, formulations, and cell growth profiles.

Ignoring regular calibration of balances can lead to numerous problems down the road. An improperly calibrated batch balance turns accurate measurement recording into guesswork. That means that any weight recorded from a non-calibrated balance is inaccurate and will potentially cause greater problems as the accuracy of the balance degrades more over time.

That’s why it’s always recommended to work with a precision measurement professional when you need analytical balance calibration or any other balance or scale calibration services. When you partner with Cross Precision Measurement, you know you’re getting accurate and precise balance calibration service combined with world-class customer service.

Expert Balance Calibration Procedure and USP 41

Keeping your balance serviced and properly calibrated is an important step in keeping your process in control and repeatable. Do your calibration protocols measure up? You can trust Cross to offer balance calibration with a robust protocol including: increased load testing, decreasing load test, four corner testing, and a survey of environmental conditions that can affect balance performance. USP 41 compliance analysis is also available for customers in USP regulated environments.

Not only can Cross perform balance calibration per USP Chapter 41, our ISO 17025 certificate conveniently provides the calibration data table, standard deviation, and the minimum allowable weight that your balance can accurately weigh.

These are only a few of the benefits of working with an established and experienced professional balance calibration company. For more information or to get a quote for balance calibration service, fill out our form to contact a local Cross team member today.

A Calibration Company Near You

At Cross Precision Measurement, we always perform our calibration services using industry-standard, NIST traceable calibration procedures. And we perform all of our calibration procedures using minimally invasive techniques with a focus on a quick turnaround time. That way, you know you’re getting world-class calibration services with minimal downtime and reduced work stoppage. This includes calibration for all kinds of scales and weights, from axle truck scales, test weight calibration, and many others.

Expert calibration procedures for scales isn’t the only service you get when you work with Cross Precision Measurement though. Our calibration technicians also provide as found as left readings so you know the degree of calibration service provided as well as a certificate of calibration. And your calibration certificate is always available through GageSuite®, Cross Company’s online calibration certificate storage and tracking system.

When it comes to calibrating truck scales or other industrial measurement equipment, two important considerations are accuracy and consistency. That means our goal is to provide all of our customers with professional calibration services at the highest degree of accuracy possible. And we want to provide those services again and again, ensuring that your scales are calibrated when you need them.

NIST-Traceable

ISO 17025

Online Calibration Certificates

Calibration Labs

On-site Calibration

Accredited Calibration Company

Always Access Your Calibration Certificates

When you work with Cross Precision Measurement, you also gain access to one of the most comprehensive calibration schedule and certificate management systems in the industry, GageSuite. Built and maintained by our own in-house team, GageSuite is designed to give our customers full access to calibration schedules and certificates of calibration whenever they need them. That way, all of our customers can accurately track their calibration status, equipment repair histories, and schedule any upcoming calibration services.

GageSuite also gives our customers the ability to track equipment in real time using location data tracking. This significantly reduces the risk of lost tools or gauges.

Best of all, GageSuite Standard is free for Cross customers. Utilizing GageSuite, our customers are able to quickly and easily locate the information they need to provide any necessary documentation for auditors or internal quality inspection. When you work with Cross, you’re getting more than just calibration. You’re getting a total asset management solution. Always know your calibration status with Cross Precision Measurement. GageSuite offers; Equipment Lists, Calibration Certificates, Order Status, Location Tracking, And More.

cross gagesuite calibration tracking software

See why customers love GageSuite, our award winning cloud based calibration management system.

Professional Balance Calibration Services

Finding balance calibration services near you shouldn’t be a headache. At Cross Precision Measurement, our fully-equipped calibration laboratories are able to perform the balance calibration, scale calibration, or any other weighing calibration services your operation may require.

Working with a balance calibration company you trust is important. But when you partner with Cross, you’re getting more than just a scale calibration company or expert weight calibration procedures. Our fully-stocked calibration labs paired with expertly-trained technicians and engineers gives us the ability to perform any weight or scale calibration services our customers might need.

Cross is also able to provide our customers with industry-leading products through our partnerships with world-class metrology brands. At Cross, we’re ready and willing to help maintain your operation’s calibration integrity.

Why Cross Precision Measurement?

At Cross Precision Measurement, we’ve worked with countless businesses across many, many industries. And for every one we’ve provided world-class calibration, inspection, testing, and precision measurement products.

We’ve always had one goal: to provide the greatest value to our customers. That value comes from optimizing manufacturing processes and creating a better experience for both our customers and their end users. And we do all of that by providing every one of our customers with the tools they need to succeed. From regular calibration services to calibration tracking software.

Whether it’s in the form of embedded calibration services, product testing, or metrology equipment, Cross can provide the precision measurement services you need.

Check out our other services or contact a precision measurement expert at Cross to get started today.

Find Balance Calibration Near Me

Previous
Next

See how our precision measurement team can help improve quality, increase efficiency, and reduce risk.

Balance Calibration 6

J.A. King is Now Cross Precision Measurement!

Same team, same expertise. Since 1939, the precision measurement professionals at J.A. King have been your trusted measurement partner; providing accuracy, reliability, and efficiency to let you focus on what you do best. That same team is now the Precision Measurement Group at Cross. Learn more about our history.

J.A. King Headquarters

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet to paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are a 100% employee owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.