100% Employee Owned, Founded 1954

Crane Scale Calibration

Crane Scale Calibration Services

When operating heavy equipment such as cranes and other overhead lifting devices, it’s important to know materials being transported are within the capacity of the equipment moving them. While it may seem obvious that lifting equipment itself is capable, sometimes cables or stress points can fail at much lower tension levels and can be considered weak links. In situations such as these, a known weight is required to ensure safety of operators and other workers.

Not knowing these tolerances or weight levels can cause major problems for industrial facilities. These problems can come in the form of damaged machinery leading to unplanned downtime or, even worse, operator injury. That’s just a couple of reasons that calibration services for crane scales are necessary.

At Cross Precision Measurement, we make it our business to ensure all your industrial crane scales are calibrated, precise, and operational. Our skilled calibration technicians will check your crane scales using modern scale calibration equipment with traceable standards. This ensures you won’t have any unpleasant surprises down the line.

Precise Calibration for Crane Scales

In other scenarios weight may be required to calculate product cost or for batching purposes. Incorrect weight may result in loss of profit or inconsistent batch quality. Either way, it’s important to have your crane scale calibrated on a regular basis to ensure accurate and safe operation. When every minute of uptime is crucial, it’s necessary to have proper scale calibration. That way you can trust that your equipment will operate the way you need it to.

With NIST traceable master test standards allowing our technicians to measure tensile force up to 100,000 lbs, the precision measurement group at Cross offers crane scale calibration for a variety of models from leading manufacturers.

For more information about crane scale calibration or to request a quote, fill out our contact form to contact a local Cross team member today!

Cross Company Scale Calibration Services

The precision measurement group of Cross offers ISO 17025 accredited and NIST traceable calibration services for all types of force measurement devices, from load cells to crane scales. Our master technicians always utilize industry-recognized equipment and master standards to perform comprehensive calibration services. That way, our customers can always trust that their force measurement devices have been properly calibrated to master standards and are producing accurate readings every time.

In addition to precise calibration services, our technicians also provide As Found, As Left readings in addition to calibration certificates. With these, you can see the exact status of your equipment, when it was last calibrated, and when it is up for recalibration. Further, all of this calibration documentation is available 27/7 through GageSuite®, the Cross online calibration tracking system.

When it comes to calibration services for manufacturers and others within the industrial world, the two most important considerations are accuracy and consistency. At Cross Precision Measurement, we strive to provide the highest degree of accuracy in calibrations every single time. That way, you can trust that your force instrumentation or equipment is providing accurate readings every time.

As Found, As Left Reports

On-Site or In-Lab Calibration

Expert Technicians

Certificates of Calibration

Calibration Certificates and Tracking

At Cross, we didn’t think our customers should have to search through a filing cabinet to be able to prove recent calibration to an auditor. So we worked to develop GageSuite, our award-winning, cloud-based calibration certification and status tracking system. Our world-class system lets our customers manage and maintain their calibration certificates while also managing operational assets. All in one software.

With GageSuite, you have complete access to calibration histories, certificates of calibration, and real-time calibration status of individual equipment.

Through this system, customers are able to miss less tool calibrations, which lowers expenditures, limits disruption, and increases accountability. For our customers, GageSuite provides a total asset management solution, from equipment location to upcoming calibration.

Always know your calibration status with Cross. Offering: Equipment Lists, Calibration Certificates, Order Status, Location Tracking, And More Services

cross gagesuite calibration tracking software

See why customers love GageSuite, our award winning cloud based calibration management system.

Your Force Calibration Company

Crane scales may be used in your facility to weigh hanging materials, calculate batch weight, or for a variety of other applications. So you need to be able to trust their accuracy to make smart decisions for operational procedures. Unfortunately, no scale stays calibrated forever and over time scales diminish in accuracy. That’s why you need a professional crane scale calibration company. A company like Cross Precision Measurement.

At Cross, we don’t just want to be your crane scale calibration company. We want to be a single-source service provider for all of your operational needs. Our skilled technicians and fully-equipped calibration labs allow us to perform a huge range of analyses, repairs, and calibrations. From scale repair to hoist inspection, Cross Precision Measurement is more than capable of providing all of the precision measurement services your operation relies on.

If simplifying your crane scale calibration procedure, gaining access to a calibration tracking system, and receiving world-class customer service sounds appealing to you, partner with Cross today for all your force calibration needs.

Why Cross Precision Measurement?

At Cross Precision Measurement, we’ve worked with countless businesses across many, many industries. And for every one we’ve provided world-class calibration, inspection, testing, and precision measurement products.

We’ve always had one goal: to provide the greatest value to our customers. That value comes from optimizing manufacturing processes and creating a better experience for both our customers and their end users. And we do all of that by providing every one of our customers with the tools they need to succeed. From regular calibration services to calibration tracking software.

Whether it’s in the form of embedded calibration services, product testing, or metrology equipment, Cross can provide the precision measurement services you need.

Check out our other services or contact a precision measurement expert at Cross to get started today.

Find Crane Scale Calibration Near Me

Previous
Next

See How Our Precision Measurement Team Can Help Improve Quality, Increase Efficiency, And Reduce Risk

Crane Scale Calibration 6

J.A. King is Now Cross Precision Measurement!

Same team, same expertise. Since 1939, the precision measurement professionals at J.A. King have been your trusted measurement partner; providing accuracy, reliability, and efficiency to let you focus on what you do best. That same team is now the Precision Measurement Group at Cross. Learn more about our history.

J.A. King Headquarters

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet to paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are a 100% employee owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.