Clicker Presses, Hydraulic and Pneumatic- Fabric
Swing Arm (Clicker Presses) are used for a wide variety of die cutting applications. The most common uses are cutting soft to semi-rigid materials such as fabrics, leather, cork, rubber, foam and other like materials. Our clicker presses are used in many laboratories and testing facilities.
Click Here for a Detailed Product PDF
Clicker Press, Hydraulic Model SE8 (KFG-2010)
- Cutting table 12 x 24 inches
- Top arm width 12 inches
- Cutting pressure 8 tons
- Maximum stroke 3.5 inches
- Dimensions /weight 24 x 27 x 53 inches x 946 lbs
Clicker Press, Hydraulic Model SE20C (KFG-2010B)
- Cutting table 14.5 x 36 inches
- Top arm width 14.5 inches
- Cutting pressure 20 tons
- Maximum stroke 3.5 inches
- Dimensions /weight 36 x 33 x 56 inches x 1350 lbs
Features for KFG-2010 and KFG-2010B
- Completely hydraulic and made of strong casting material, ensuring powerful, yet quiet running.
- Ensures maximum beam strength and performance. All moving parts are made of hardened steel and are self-lubricating
- Automatic stroke end setting
- Different height cutting die without adjustment
- Control push buttons with built in device for 3/10 of second maximum delay operation to ensure safety Overload protection
- 1 year warranty on parts, excluding cutting pads
KFG-2010A Replacement cutting bed for the SE8 clicker press, 12 x 24 x 1” thick, white HDPE.
KFG-2010C Replacement cutting bed for the SE20C, 14.5 x 36 x 1 inch thick HDPE
Clicker Press, Pneumatic Model 700 (KFG-2011)
- Cutting Pressure 7 Ton
- Cutting Area 12″ x 12″
- Deck clearance 2.0″
- Travel of deck is adjustable up to 1.0″
- Recommended die height 1.25″
- Approximate Shipping weight 260 lbs.
- Operating Pressure 80-110 PSI
- Overall Dimensions 12″ W, 19″ D, 13″ H
Clicker Press, Pneumatic Model 1500 (KFG-2012)
- Cutting Pressure 15 Ton
- Cutting Area 24″ x 12″
- Deck clearance 2.0″
- Travel of deck is adjustable up to 1.0″
- Recommended die height 1.25″
- Approximate Shipping weight 560 lbs.
- Operating Pressure 80-110 PSI
- Overall Dimensions 24″ W, 20″ D, 14″ H
Accessories for Clicker 700 & 1500
Cutting Tables for Clicker 700 & 1500
To ensure ease of operation, the lower deck of the Clicker Pres needs to be level with surrounding tables for ease of loading sample and dies. Rather than fabricating a custom-built table or bench, our prebuilt tables have the correct ergonomics and features to match your Clicker Press.
KFG-2011A Cutting Table for Clicker 700
KFG-2012A Cutting Table for Clicker 1500
Replacement Cutting Bed for the Clicker 700
KFG-2011B
The replacement cutting beds are constructed of durable high-density polyethylene (HDPE) 12″ x 12″ x 1/2″ thick.
Replacement Cutting Bed for the Clicker 1500
KFG-2012B
The replacement cutting beds are constructed of durable high-density polyethylene (HDPE) 12″ x 24″ x 1/2″ thick.
Clicker Dies – Forged Steel
KFG-2013
Custom – made Forged Steel Clicker Dies, 1 1/4″ x 1/4″ cross-section, with straight or pinked cutting edges, sandblasted and PTFE coated for durability and ease of sample removal. The hardened cutting edges will last for years, although a resharpening and reconditioning service is available for dull or damaged dies. Suitable for all Hydraulic or Pneumatic presses. Provide dimensions or sketch for your personal 48 hour quotation.
A Leading Distributor of Industrial Supplies and Equipment
As an authorized distributor for a wide range of top-quality brands, Cross offers a complete selection of process measurement and control equipment backed by industry expertise.