Kreon Case study – IMARC – Scanning for Engineering and Design

Kreon Case study - IMARC - Scanning for Engineering and Design 1

Overview

This case study from Kreon highlights IMARC, designer of office chair components and mechanisms. IMARC installed a Kreon measuring arm in the heart of its engineering and design department, gaining autonomy in its scanning and probing operations. Read the full case study at Kreon3d.com to learn more and contact a precision measurement specialist from Cross Company to see how a Kreon solution can improve efficiency in your operation. Cross Company is an authorized Kreon distributor in the U.S.

See How Our Precision Measurement Team Can Help Improve Quality, Increase Efficiency, And Reduce Risk In Your Operation

Latest Cross Company Updates

This article from Brooks Instrument looks into the critical role of Mass Flow Controllers (MFCs), particularly their SLA5800 Series, in enabling this complex process.
June 30, 2025
The GX-Force is RKI’s smallest personal 1-4 gas monitor with a strong internal sample pump capable of a 100’ sampling range.
June 25, 2025
The RKI GX-6000 is a versatile handheld gas detector capable of monitoring up to six gases simultaneously.
June 25, 2025
The RKI AirLink 6900 is a versatile truly wire free transmitter using electrochemical, PID or low-power infrared sensor elements to detect a variety of gases.
June 25, 2025
We’re proud to announce our partnership with RKI Instruments to support your process safety initiatives with reliable, high-quality solutions for gas detection equipment.
June 25, 2025
This buyer’s guide from WIKA is an excellent resource for selecting the right pressure measurement instruments in the Food and Beverage industry.
June 25, 2025

Contact our Team

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are 100% employee-owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet of paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.