Top Tips For Truck Scale Care

Truck Scale Cheat Sheet

If you regularly use truck scales in your day-to-day operations, you know how important it is for them to be in good working order. That means working when you need them to and showing numbers you can trust.

At Cross Company, we understand how much goes into making sure those truck scales are not only currently in good working order, but that they also stay in good working order.

This cheat sheet was designed to provide quick answers for truck scale owners and operations who routinely rely on them. Of course, we’re always available to test, calibrate, or diagnose any issues with your truck scale. But there’s a lot that scale owners can do too in order to extend the lifespan of their scales and to prepare them for environmental conditions year-round.

 

General Maintenance

Top Tips For Truck Scale Care 1While truck scales are more rugged than a lot of other scales, they’re not immune to unfavorable conditions.

An easy-to-spot issue is debris. Being low to the ground, truck scales can easily accumulate dirt, sand, rocks, trash, and other sediment. This can happen on, under, or even around your scale, potentially causing inaccuracies or premature drift. Make sure debris is regularly being cleared from everywhere, checking under the scale and cleaning with a hose or pressure washer and ensuring I-beams are free of dirt/debris to prevent deterioration. Freeing trapped dirt and rocks from the clearance between the end of your scale and bulkhead also prevents degradation.

Being outdoors, water is always a risk with truck scale operation. There should never be standing water pooling under or around your scale as excess moisture can lead to rust and corrosion which significantly impact accuracy and operation. This is especially critical for pit-mounted scales.

Lastly, it’s important to keep an eye out for cracks, holes, or excessive wear in the scale foundation as well as rust, corrosion, or other damage to the scale itself. A damaged scale is a less-accurate scale.

 

Quick Tips:

  • Check everywhere for debris
    • Make sure not just the top is clear of debris. Check under the scale and clear areas surrounding the scale.
    • Using a hose or pressure washer to remove trapped dirt, rocks, trash, and other debris keeps the scale in good working order for longer.
  • Control water to prevent rust
    • Standing water needs to be removed quickly and thoroughly
    • Check sump pump (if applicable) and ensure it’s operating properly
    • Maintain a free flow with no obstruction for gravity drains to prevent pooling
  • Act quickly when damage becomes apparent
    • Improper water management can lead to rust or corrosion on the scale
    • Cracks or holes in the foundation may not significantly affect operations right now, but will become larger, more expensive fixes in the future

 

Managing Snow, Ice, and Water Build-Up

If you live in an area of moderate to heavy snowfall, it’s important to know how this impacts your truck scale performance.

In short: freezing conditions and ice build-up negatively impacts truck scale accuracy and performance. For example, snow build-up in scale suspension components can lead to stiffening, which increases resistance and skews readings. Snow build-up between foundation and weighbridge can add further resistance and can skew accuracy even further.

But it doesn’t have to be actively snowing for frozen conditions to impact truck scale accuracy. Debris swept under or along the sides of the scale itself can contain trace moisture and when that moisture freezes it can cause the same problems.

Even if you’re in a location without significant freezing risk, managing water build-up is still necessary. And if snow is left til thawing, you now have a water issue to deal with!

 

truck scale in the snow

 

Quick Tips:

  • Prompt clearing prevents harmful build-up
    • The best method is simply removing snow and debris from the scale quickly. This avoids the problem of build-up all together
    • Avoid snowplows. Heavy machinery doesn’t mix well with delicate scale mechanisms. Instead, use a snow blower
  • Stop snow or frozen debris before it gets too close
    • Many operations will use some kind of barrier like haybales, sandbags, or even poly drums to prevent snow or debris from blowing under. This can work, but it’s important to remember to get rid of the snow before it melts and flows under the scale!
  • If already frozen, avoid the temptation to salt or use chemicals
    • If there’s already ice build-up on the scale itself, it’s tempting to opt for a quick-fix like salt or chemicals. However, these solutions can corrode steel components within the scale. Instead, use mobile steam-cleaning equipment

 

Preparing for the Unexpected

While winter has unique challenges with snow and ice, that doesn’t mean summer is smooth sailing. Warmer weather means we’re coming up on lightning season.

A direct lightning strike (or even on nearby) to your truck scale can short out load cells, wires, junction boxes, and accessories, grinding weighing to a halt.

 

Quick Tips:

  • Ensure your scale is properly grounded
    • With a correctly placed and professionally installed grounding system, the current goes right around the electronics. But while grounding is a helpful protection, it’s difficult to retrofit if a scale doesn’t already have it set up and, more importantly, it’s not failsafe. In addition, it needs to be done according to the scale manufacturer’s specification or there may be warranty implications.
  • Invest in transient protection
    • Many truck scale manufacturers now offer scales and load cells specifically designed to prevent damage from lightning or unexpected electrical surges. These transient protection systems are possible to upgrade to (as long as you ensure the replacement equipment is NTEP-approved and compatible with your scale model)
  • Know your warranties
    • Whether something has already happened or you’re looking to prepare, it’s necessary to know what’s offered and protected on your scale via the warranty. Variables include what’s covered, how long it’s covered for, whether it’s just load cells or the whole scale, and many other considerations. Knowing the details can make getting back to work after an incident far smoother
  • Contact an expert
    • If your scale is completely down and no one on-site is able to diagnose and repair the issue, Cross is always available to help. We’ll dispatch a team of expert technicians to assess damage, offer replacement parts, perform recalibration, and get you back up and running as soon as possible

Latest Cross Company Resources

System integrators must test control system configurations. Ideally we thoroughly test them before systems are delivered. Simulating inputs based on outputs is a key tool to perform these tests.
July 28, 2026
Author – Chris Hardy
Cross Logo
A global leader in food ingredients provides micro-ingredient feeders to flour and corn mills to facilitate the addition of enrichments, bleaching products, and other additives. To address increasing customer requirements for precision and data logging, the manufacturer partnered with Cross to modernize these systems by retrofitting established hardware with advanced
June 30, 2026
Cross Logo
production line using servo drive automation
Maximize efficiency and precision in your automation processes. Learn how to optimize your motion control systems with Applied Motion Products from Cross Company.
June 16, 2026
Cross Logo
Stop patching and start planning. Learn how a phased 6-step roadmap for legacy control system modernization reduces risk, spreads costs, and avoids downtime.
April 9, 2026
Cross Logo
katronic logo
Learn how Cross Process Solutions utilized the KATflow 150 to solve water billing inaccuracies and identify steam leaks for a major manufacturer. Discover the advantages of non-invasive ultrasonic technology for continuous industrial processes where system downtime is not an option.
February 9, 2026
Cross Logo
katronic logo
Cross Company helped a major automotive manufacturing facility in Alabama improve their operation by replacing legacy ultrasonic flow meters. Learn More!
February 5, 2026
Cross Logo

See how our team can help improve efficiency, reduce risk, and raise quality in your process.

Contact our Team

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
What can we help you with today?*

Where Can We Send Your Information?

Name*
Company Location*
Form Type

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are 100% employee-owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet of paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.