100% Employee Owned, Founded 1954

Search
Close this search box.
Cross Logo Horizontal

Product Spotlight: Continental Disc Corporation HPX-Ta

Continental Disk Logo

Introducing Continental Disc Corporation's HPX-Ta™ Tantalum Rupture Disc

CDC’s new HPX-Ta™ rupture disc is a Tantalum semicircular scored reverse acting rupture disc designed specifically for use in highly corrosive media, such as bromine, chlorine, HCL, nitric acid or sulfuric acid. In certain concentrations, temperatures and moisture conditions, Tantalum is frequently the only suitable rupture disc material for the application.

Applications

  • Petrochemical / Agricultural Chemical – reactors, storage vessels, heat exchangers, discharge heads, safety relief valve isolation
  • Industrial Gas – process columns and vessels, storage and transportation tanks
  • Oil & Gas – distillation columns, separators
  • Pharmaceutical – production vessels, heat exchangers
  • Semiconductor Production – specialty gas distribution and storage transportation tanks

Features

  • Available in sizes 1″ – 8″
  • Tantalum rupture disc material for corrosion protection
  • 316 SS standard outlet ring material, HASTELLOY C, Tantalum and other materials available upon request
  • Cyclic durability designed for a minimum of 1,000 cycles from full vacuum to 90% of the burst rating
  • 90% maximum recommended operating ratio
  • Safety ratio of 1 to 1 or less. If the rupture disc becomes damaged, it will relieve at or below the burst pressure
  • Ideal for liquid or gas / vapor applications
  • Non-fragmenting design
  • ASME Code Section VIII, Div 1 compliance available when requested
  • Available option: cleaned for oxygen or chlorine service
Product Spotlight: Continental Disc Corporation HPX-Ta 1

Benefits

  • Provides lower maintenance cost, greater reliability as compared to alternate rupture disc types or materials
  • Compatible with the HPX Insert, HPX-PT (pre-torqued) or HPX double disc holders
  • Holder corrosion resistance can be enhanced by Tantalum lining or coating of the holder inlet and / or Tantalum coatin of the outlet holder
  • Tantalum lined HPX-PT (pre-torqued) holders are ideal for use on vessels or pipe spools having TEFLON or glass lined flanges
  • Increased productivity of your system

See how our team can help improve quality, increase efficiency, and reduce risk.

Related Posts

Contact our Team

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are 100% employee-owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet of paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.