100% Employee Owned, Founded 1954

855.889.0092

100% Employee Owned, Founded 1954

855.889.0092

100% Employee Owned, Founded 1954

855.889.0092

Cross Hose & Fittings is now the North Carolina Stocking Distributor for Parker Transair Products

Robin Daughtry | April 25th, 2012

Transair Advanced Piping Systems

Quick Assembly

Transair offers the right solutions for all of your compressed air, liquid and inert gas applications. Quick assembly, durability, superior performance and reduced overall cost of your compressed air piping, fluid quick connection pipe and inert gas aluminum piping needs available from Cross Hose & Fittings.

Transair’s aluminum and stainless steel pipe systems are easy to assemble and easy to modify.

Transair piping is easier to lift and handle than standard steel piping, and its push-to-connect fittings secure connections with a simple push and twist. The fittings eliminate the need for skilled pipe fitters, special tools, pipe preparation and threading.

Transair also eliminates the time needed for soldering and glue drying. And once the pipe is pushed into the fitting, the connection is secure and ready to be pressurized.

Lastly, various technologies take into account the specific requirements of each diameter of pipe and provide you with an optimum safety factor and easy connection.

Transair also offers an easy means of adding new drop or bypass onto an existing length of pipe is an important consideration for any air pipe work system. Transair quick assembly brackets are designed for this purpose, without the need to cute the pipe. A swans neck built into the brackets retains condensate water in the main line. Thanks to its small size, the Transair quick assembly bracket facilitates new additions in the tightest places and can be used for connecting horizontal branch lines and vertical drops.

Durable Equipment, Clean Air Quality

Transair aluminum and stainless steel pipe systems ensure a total absence of corrosion (self protection by formation of aluminum oxide). The inner pipe surface consistently delivers clean compressed air, inert gas, and chilled water. Transair also protects industrial equipment against water deterioration thanks to its quick assembly brackets with integral upward loop.

Transair prevents the problems caused by rust, which affects galvanized steel systems. Due to consistent clean air/water, Transair aluminum pipe and stainless steel ensures higher longevity of equipment and avoids frequent changes of filtration elements.

Optimum Efficiency of Machinery & Tools

The “full bore” design of Transair’s components, the low friction coefficient of aluminum pipe and stainless steel, and the sealing characteristics of the system ensure optimal and constant flow throughout. Due to its innovative technology, Transair gives better performance in terms of improved flow and reduced pressure drop.

Example:
A 63 mm Transair system gives a flow performance better than that of a nominal (2 ½’’) galvanized steel system.
Transair aluminum pipe ensures superior flow performance over a longer period of time.

Example:
Steel pipe can rode by a 40% factor over its lifetime. Transair maintains is smooth bore throughout its lifetime.

Overall Savings: Reduction of Installation, Operating Cost & Commissioning Cost

Transair aluminum and stainless steel systems are quick to install and ready for immediate pressurization. Components are removable and interchangeable and allow immediate and easy layout modifications. All components incorporate quick assembly connection, which enables Transair systems to be assembled much more quickly than galvanized steel or copper system.

Example:
·    Galvanized installation: 6 feet per hour
·    Copper installation: 8 feet per hour
·    Transair installation: 45 feet per hour
All modifications or added extensions to a Transair system can be done extremely quickly and will meet your production requirements.

Example:
·    Lateral dismantling of pipe: 1 minutes 30 seconds
·    Drilling of pipe: 2 minutes 30 seconds
·    Mounting Brackets: 45 seconds
·    Remounting of pipe to the system: 1 minute 30 seconds

Know When to Replace Your Hydraulic Hose Assemblies

Robin Daughtry | October 16th, 2013 How Long Do Hydraulic Hose Assemblies Last? We hear this question a lot and there is no simple answer….however there are several signs that maintenance personnel can look for to determine when it’s time for preventive hose assembly replacement. According to the Society of Automotive Engineers (SAE), the shelf life

Read More »
Cross Group - Hose and Fittings

Condition Monitoring for Predictive Maintenance with Parker’s SensoNODE Blue

Chad Hayden | November 28th, 2018 SensoNODE Blue is Parker’s series of Bluetooth-powered sensors. Compact, energy-efficient, and wireless, they are designed to provide a simple solution for portable and diagnostic applications with mobile devices. SensoNODE monitors assets for changes in pressure, temperature, and humidity to help predict problems and prevent downtime. Why Condition Monitoring Is Important Did

Read More »
Cross Group - Hose and Fittings

Can You Mix and Match Hose Manufacturers?

Chad Hayden | November 27th, 2018   Cross Hose & Fittings is a Parker distributor, providing precision-engineered products that meet or exceed a variety of industry standards. Parker is synonymous with quality, and their products can be found on and around any production operation with moving parts. Although there are a number of manufacturers on the

Read More »
Scroll to Top