100% Employee Owned, Founded 1954

Search
Close this search box.

Discontinued Rice Lake Equipment

Below is the current list of Rice Lake equipment we have in our system that has been discontinued. Because this equipment is no longer manufactured, replacement parts are unavailable. If you have equipment on this list, don’t worry! Contact a Cross representative and we can help determine the best solution for your needs.

CheckWeighers

  • DS-470SS (DIGI)
  • CW-80 Over/Under Checkweigher
  • CW-40 Over/Under Checkweigher

Indicators/Controllers

  • Condec™ UMC444 Digital Weight Indicator
  • SURVIVOR 320HE and 310HE Hostile Environment
  • Condec™ UMC222 Digital Weight Indicator
  • Condec™ UMC555 Digital Weight Indicator
  • DIGI® DI-28BR Digital Weight Indicator
  • DIGI® DI-28SS Digital Weight Indicator
  • IQ Plus 510 Digital Weight Indicator
  • IQ plus 310A Digital Weight Indicator
  • IQ Plus 800 Digital Weight Indicator
  • 520 Configurable Weight Indicator
  • Condec™ UMC600 Programmable Weight Indicator
  • IQ Plus® 710 Configurable Weight Indicator
  • IQ 700IS Intrinsically Safe Digital Indicator
  • 320IS Digital Indicator (Intrinsically Safe)

Load Cells

  • RL32155 Single-Ended Beam Stainless Steel Load Cell
  • RL71000 HE Double-Ended Beam Stainless Steel Load Cell
  • RLSB2L/RLSB2M/RLSB2MLW Single-Ended Beam Alloy Steel Load Cell
  • POD1 Weigh Module, Aluminum IP65

Precision Balances

  • MB Series Precision
  • QB Series

Contact a Cross representative if you are currently using any of the Rice Lake equipment on this list. We can help to you determine the best replacement equipment for your application. Also, ask about our risk reduction matrix and how we can help you determine how much you can get out of your equipment before needing to replace.

See how our precision measurement team can help improve quality, raise efficiency, and lower risk.

Contact our Team

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are 100% employee-owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet of paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.