100% Employee Owned, Founded 1954

Cross Logo Horizontal

GD&T Training Greenville, SC – 2022

GD&T Training Greenville, SC - 2022 1

Event Overview

Cross Precision Measurement will be hosting a three-day GD&T Training led by Applied Geometrics. Training will be at our new Greenville, SC facility on October 18-20, 2022 with limited spots available. The cost of the class will be $1,395 per person and will include all materials as well as lunch each day. Contact a Cross team member today to learn more and register for the event using the form below.

About Applied Geometrics:
For over 20 years, professionals at AGI have helped global manufacturers dramatically reduce rejects and increase profits through successful implementation of Geometric Dimensioning and Tolerancing (GD&T). Learn more about Applied Geometrics and what the GD&T Training has to offer and download a copy of the program outline.


October 18-20, 2022

Program Outline

Your drawings have GD&T on them (or perhaps they are supposed to)! If you have attempted to work with GD&T and you lack the confidence to choose which geometric controls to apply or you have trouble interpreting existing specifications and reading the “language” of GD&T, this course is for you. The improper use of GD&T can be far more costly than not using it at all!

This program is a complete introduction to the ASME Y14.5 Standard. In this program we focus on the “What, When, Why and How” of GD&T. The main goal is to bring all participants to a common, basic and operational level of understanding. The course is a thorough introduction for those with a little, to a moderate, level of experience using GD&T.

Complete GD&T training requires more than just a few days and a single class; however, this class is the first step in the journey to forming a solid foundation of GD&T knowledge from which a true grasp of GD&T principles (and the ability to properly apply and interpret the complex simplicity of the “language” of GD&T) will come.


Event Registration

Let us know if you can attend! Register today to hold your spot and reach out to a Cross team member for more information about the event.


Contact our Team

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet to paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are a 100% employee owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.