Advantages of Using V-Cone Technology for Measuring Chilled Water and Steam

McCrometer Resource

McCrometer Main Logo

McCrometer’s V-Cone® Flow Meter is an advanced differential pressure instrument which is ideal for use with liquid, steam, or gas media in rugged conditions; especially where accuracy, low maintenance, and cost are important.

In addition, as the V-Cone has very little upstream and downstream piping requirements, they are useful in tight-fit and retrofit installations where other meters may not work. In fact, most instances the use of V-Cones associated with chillers for chilled water in large institutional users are a matter of space, accuracy, and turndown.

With many large universities and other facilities such as hospitals and airports across the U.S., the reason for initial interest and subsequent purchases of V-Cones to measure Chilled Water was to fit within the confines of the existing and new buildings that were being used to house the chillers.

Advantages of Using V-Cone Technology for Measuring Chilled Water and Steam 1

Diagram of typical V-Cone installation (Click for larger view)

Advantages of Using V-Cone Technology for Measuring Chilled Water and Steam 2

Internal View of a V-Cone (McCrometer)

V-Cones have recently been selected for Steam service for mostly the same reasons as they are selected for Chilled Water. Space limitations in new and/or older buildings are a serious concern. V-Cones have the smallest piping requirements of practically any flow meter and continue to deliver accurate measurement, so they are fiscally responsible and cost effective. Additionally, in steam, they allow condensate and/or other small particulate matter to pass without affecting the measurement, thus giving much better accuracy instantaneously and over time.

Additionally, the delivered accuracy was important. In the past, most usage had been ignored, but with the rising costs associated with cooling, each individual building must be accountable for individual use. This is just good fiscal responsibility and management from an energy balance standpoint. Turndown was an issue because of seasonal swings in usage based on climate and population in the buildings at any particular time. Therefore, the meters needed to be able to have a large flow span (turndown), which remained accurate during continuous use.

Are you interested in learning more? Fill out our contact form with some details of your application and we’ll have a specialist get in touch! Also, learn more about the McCrometer products and solutions offered by Cross.

Latest Cross Company Updates

Cross Company is pleased to announce our partnership with ZOOK to provide rupture disks throughout the Southeast.
November 3, 2026
hoist
Cross Company is pleased to announce that we’re able to offer hoist load testing and certification throughout our service area. That means we can provide the same high-quality service to our customers regularly using hoists to move equipment.
November 3, 2026
Cross Logo
With a comprehensive range of absorbents, spill kits, and containment systems, SpillTech products are designed to handle even the toughest spills, ensuring your work environment remains safe and compliant.
November 1, 2026
Dissolved Air Flotation (DAF) tanks
From municipal facilities to industrial operations, wastewater treatment plays a vital role in public health and environmental protection. These complex systems rely on consistent performance and strict adherence to safety and compliance standards. One of the most overlooked yet critical elements in these systems? Overpressure protection.
October 30, 2026
Steam is an efficient way to transport energy throughout a facility. This energy is then used for a range of purposes, including heat transfer, power generation, mechanical work, sterilization, and humidification in many different industries. Cross partner Azbil’s vortex flow meters make measuring steam flow easy, reliable and cost effective.
October 30, 2026
In the oil and gas industry, keeping solids in suspension while blending various grades of crude oil for proper processing poses significant operational challenges. Traditional methods often require substantial energy inputs, complex equipment
October 30, 2026

Contact our Team

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
What can we help you with today?*

Where Can We Send Your Information?

Name*
Company Location*
Form Type

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are 100% employee-owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet of paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.