Cross Hose and Fittings Frequently Asked Questions
Monday – Friday 8:00 am – 5:00 pm
Asheville, NC: 160 Sweeten Creek Road Asheville, NC 28803
Greensboro, NC: 3012A South Elm-Eugene Greensboro, NC 27406
Raleigh, NC: 2101 Westinghouse Blvd, Raleigh, NC 27604
Winston-Salem, NC: 8100 North Point Blvd, Winston-Salem, NC 27105
Yes! We offer mobile service in the Piedmont Triad region, covering Greensboro, Winston-Salem Triad, High Point and the surrounding area. Learn more about our mobile hose service.
Mostly, yes. Contact our team for more information.
No, for safety reasons we cannot repair a used hydraulic hose.
It depends. We can replace the hose portions but not the steel tube. If you have about 2″ of straight tubing, we can likely cut it and repair by replacing the hose.
For the most part yes. We can duplicate what you have if you bring the old hose in and we can determine what threads you have and go from there.
We carry the Parker FEM series and have several different thread options. 90 percent of the time it is the ½ body size that you are looking for. The most common thread is ¾ SAE (o-ring boss) and the part numbers are FEM-501-12FO and FEM-502-12FO. If you do not know the thread please bring the coupler and the nipple in and we can take care of you.
Bobcat has a proprietary coupler that we can not order. The thread is really fine with has two o-rings on it and it looks more like a machine type of thread for a cylinder.
