100% Employee Owned, Founded 1954


100% Employee Owned, Founded 1954


100% Employee Owned, Founded 1954


Step-By-Step Hydraulic Hose Assembly

Mary Melton-Hale | December 14th, 2017

Many businesses opt to keep their own crimp machine on premises for quick and easy hose assemblies. Cross Hose and Fittings outfits these businesses with their machines and provides training to keep hose quality and safety top of mind. Here are step-by-step instructions for hydraulic hose assembly.

Step 1: Gather Required Tools and Materials

  • Hydraulic hose
  • Hydraulic hose fitting
  • Hose lubricant
  • Calipers
  • Paint pen
  • Safety goggles
  • Crimping machine
  • Crimping die and collar
  • Ultra Clean nozzle, projectiles, and clean seal caps

Step 2: Put On Safety Equipment

At this point, put on your safety equipment. Company protocol is to wear safety glasses while cutting and crimping.

Step 3: Measure and Cut the Hose

Measure the length of hose that you need and cut it to size with a hose saw. For critical hose lengths, make sure to account for the cutoff factor when determining the final length. After cutting the hose, you should have a clean edge. If not, use a file to clean the ends. Saws have different cutting specs so make sure to compare capabilities. Remember to clean the hose ends to reduce contamination and hose assembly failure.

Ultra Clean projectiles should be fired through the hose prior to the installation of end connections. Fire one projectile from one end of the hose through its entire length, then fire the second projectile from the other end of the hose through its entire length. This will allow cleaning in the areas occupied by the insertion of the hose nozzle at either end during the cleaning process.

Step 4: Select Fitting Series

When selecting a fitting series, consider the working pressure, style, type, orientation, attachment methods, and material for its corrosion resistance. It is very important that you do not interchange hose and fitting brands.

Step 5: Mark Insertion Depth and Push on the Hose Fittings

Determine insertion depth of the fitting by utilizing a hose insertion depth block or marking hose from hose end. Draw a thick chalk line around the hose to identify the insertion depth. Lubricate hose with P-80 if necessary, however, do not lubricate if using a spiral hose. Push the hose into the fitting until the mark on the hose is even with the end of the shell.

Step 6: Verify Crimper Capabilities and Adjust the Crimper Setting

Confirm the capabilities of the crimping machine and adjust its settings or change die as necessary. Make sure to choose the correct crimp diameter for each hose assembly. Use Parker Crimpsource for specific technical specifications when crimping a Parker hose assembly.

Step 7: Select the Die

Select the appropriate crimper die set. A crimper die is specifically designed for certain hoses and fittings so make sure to verify the die set by using the crimper decal. You may also use Parkers Crimpsource for specific technical specifications. As needed, lubricate the die bowl using a premium quality lithium-base grease.

Step 8: Place the Hose in the Crimping Machine

Push the end of the hose into the crimping machine (typically bottom loading) and through the die so that the hydraulic hose fitting appears above the die. The top of the hose, now concealed inside the fitting, should not be above the die. For Parker crimpers, rest the bottom of the fitting on the die step.

Step 9: Place Die Ring

Place the die ring on the step of adapter bowl. Reference the decal on the crimper for tool selection.

Step 10: Crimp Hose

Turn on the machine. The cylinder head will slowly move down. As it pushes the collar, the collar compresses the die. Do not touch the machine until the collar is firmly at the bottom of the die. The machine should then stop.

Step 11: Verify the Crimp Diameter

Check the paint mark which you made on the hose. If it is no longer at the base of the fitting, it means the hose or the fitting moved during the crimping. However tight it may seem, this is not a good crimp. Otherwise, if the chalk mark is in place, you have successfully crimped the ends of the hydraulic hose. Measure the crimp diameter on a flat surface of the crimped shell and verify the crimp diameter referenced on the decal. Never use or sell hose assemblies with incorrect crimp diameters.

Step 12: Cap Hose Assembly

After you clean the hose, it is a good idea to cap the assembly on both ends. You can use plastic caps or heat shrink caps. UltraClean heat shrink caps or Clean Seal caps are a quick, easy, and clean alternative to cap your hose and fitting assemblies. Simply put a cap on a hose or fitting end and place in the heat shrink machine for a few seconds for a contamination-free hose assembly. The caps are available in fifteen different sizes and come in package or bulk quantities to fit your specific requirements.

By following these steps as your guideline, you should achieve a properly assembled hose. Let us know how we can help you with your hose assemblies!

Know When to Replace Your Hydraulic Hose Assemblies

Robin Daughtry | October 16th, 2013 How Long Do Hydraulic Hose Assemblies Last? We hear this question a lot and there is no simple answer….however there are several signs that maintenance personnel can look for to determine when it’s time for preventive hose assembly replacement. According to the Society of Automotive Engineers (SAE), the shelf life

Read More »
Cross Group - Hose and Fittings

Condition Monitoring for Predictive Maintenance with Parker’s SensoNODE Blue

Chad Hayden | November 28th, 2018 SensoNODE Blue is Parker’s series of Bluetooth-powered sensors. Compact, energy-efficient, and wireless, they are designed to provide a simple solution for portable and diagnostic applications with mobile devices. SensoNODE monitors assets for changes in pressure, temperature, and humidity to help predict problems and prevent downtime. Why Condition Monitoring Is Important Did

Read More »
Cross Group - Hose and Fittings

Can You Mix and Match Hose Manufacturers?

Chad Hayden | November 27th, 2018   Cross Hose & Fittings is a Parker distributor, providing precision-engineered products that meet or exceed a variety of industry standards. Parker is synonymous with quality, and their products can be found on and around any production operation with moving parts. Although there are a number of manufacturers on the

Read More »
Scroll to Top