Hughes Safety Showers Can Help You Stay in Compliance

Safety in the workplace is critical. When dealing with hazardous work environments, it’s imperative that you have safety showers and eyewash stations available in case there is an accident. The internationally recognized standard for emergency safety showers and eyewash equipment is ANSI/ISEA Z358.1. This standard focuses on the use, installation, testing, performance, maintenance and training of this safety equipment.

We encourage you to review ANSI/ISEA Z358.1 in its entirety before purchasing equipment, but Hughes has created a helpful guide to assist you in understanding the standard.

For more information on safety equipment such as emergency safety showers and eye wash stations, contact us today! We have a team of experienced safety professionals with years of experience ready to help you find the right equipment for your application.

Hughes Safety Showers Can Help You Stay in Compliance 1

Hughes Safety Showers offers a range of safety showers and eyewash stations

Latest Cross Company Updates

The new series of Quantim® QMC Coriolis flow meters and controllers from Brooks Instrument aims to achieve precise and consistent measurement and control of low flow rates of liquid or gas.
October 1, 2025
Looking to replace an Optical Comparator? 5 Reasons why the C-Vision is the right choice
October 1, 2025
Glass coating manufacturers must ensure reliable gas flow and low-pressure control for high-yield low-e glass production. Read this Brooks Instrument application note to learn how.
September 29, 2025
The new pressure/vacuum valve & flame arrester combination unit from Cross partner Groth Corporation helps protect tanks from damage created by overpressure or excessive vacuum, at the same time it provides protection from externally caused sources of heat and ignition.
September 25, 2025

Contact our Team

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are 100% employee-owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet of paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.