pH monitoring in Pharma Permitted Outfall with M4Knick

M4-Knick-Logo.png

In a pharmaceutical plant, there are multiple steps in treating wastewater created during drug manufacturing. There are three pH-dependent stages: Equalization, Neutralization, and Final Effluent. These are all critical processes and require accurate pH measurements to treat the wastewater produced by the facility. A failure of one of these measurements can cause upsets in the treatment process. Upsets create the potential for permit violations leading to financial penalties such as fines and costs to repair damage to the environment and municipal wastewater treatment infrastructure. Check out this whitepaper to learn how the M4Knick’s Unical 9000, SensoGate WA 130 and SE 571 pH sensors can help you reduce risk, improve the quality of your measurements, and save on maintenance costs. 

As a distributor for M4Knick, our team can work with you to determine the best products and solutions for your operation. Check out the application note and start a conversation with a Cross expert today to learn more about implementing a solution from M4Knick!

pH monitoring in Pharma Permitted Outfall with M4Knick 1

See How A Solution From M4Knick Can Benefit Your Operation

Latest Cross Company Updates

Dixon offers a wide range of coupling combinations to meet the needs of nearly every application. Learn more
July 1, 2025
This article from Brooks Instrument looks into the critical role of Mass Flow Controllers (MFCs), particularly their SLA5800 Series, in enabling this complex process.
June 30, 2025
The Beacon 200 is a powerful, low cost fixed system controller for two points of gas detection.
June 25, 2025
he RKI M2A-XL is a state-of-the-art transmitter that can operate as an independent, stand-alone monitor or as part of an integrated system.
June 25, 2025
The RKI Air Alert series ambient air toxic gas detector is a versatile assembly that uses an electrochemical, infrared or PID sensor element to detect a variety of gases.
June 25, 2025
The GX-3R is the worlds smallest 4 gas monitor weighing only 3.52 ounces and can comfortably be clipped within a worker’s breathing zone (2.2” W x 2.55” H x 1.02” D).
June 25, 2025

Contact our Team

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are 100% employee-owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet of paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.