Expanded Scope at J.A. King Paducah, KY

Paducah Team
Mike (far right) is the new Service Manager at J.A. King Paducah, KY

We have expanded the scope of calibration services at our Paducah, KY branch! Our new Senior Service Manager Mike Murphy has been working hard with our team to get things in place and we are proud to share our new capabilities.

Previously, our Paducah, KY branch focused heavily on scale calibration and is a key player for scale service in the region. The new capabilities introduced at their facility will enable J.A. King to provide our world class precision measurement service to the area.  We are excited to add the following disciplines to our scope of services provided:

Chemical
pH Meters
Conductivity Meters
Dimensional
Pin Gages
Calipers
Micrometers
Linear Indicators
Height Gages
Steel Rules
Tape Measures
Angle Indicators & Protractors
Feeler/Thickness Gages
Coating Thickness Gages (Film/Ultrasonic)
Surface Plates
Electrical
DC Voltage – Measure (Power Sources, Supplies, Hipot Testers)
DC Voltage – Generate
DC Current – Measure
DC Current – Generate (Process Devices, Loop Calibrators)
Resistance – Generate
AC Voltage – Measure ( Hipot Testers, Power Sources)
AC Current – Measure
Thermocouple Stimulation  (Type J,K,T,E,R,S)
RTD Stimulation/Measure
Fluid Quantities
Viscosity Meters
Mechanical
Force
Torque (Wrenches & Screwdrivers)
Rotary Torque Tools (Pneumatic, DC, Pulse)
Pressure
Vacuum
Indirect Verification of Rockwell Hardness Testers
Speed-Optic/non-contact
Thermodynamics
Relative Humidity
Temperature – Measure
Temperature – Direct Method
Time & Frequency
Times & Stop Watches

PAD A2LA Certificate
Take a look at the full scope of disciplines at our Paducah, KY laboratory by clicking on the certificate above. Also, see what else our Paducah, KY calibration laboratory offers!

Latest Cross Company Updates

The new series of Quantim® QMC Coriolis flow meters and controllers from Brooks Instrument aims to achieve precise and consistent measurement and control of low flow rates of liquid or gas.
October 1, 2025
Looking to replace an Optical Comparator? 5 Reasons why the C-Vision is the right choice
October 1, 2025
Glass coating manufacturers must ensure reliable gas flow and low-pressure control for high-yield low-e glass production. Read this Brooks Instrument application note to learn how.
September 29, 2025
The new pressure/vacuum valve & flame arrester combination unit from Cross partner Groth Corporation helps protect tanks from damage created by overpressure or excessive vacuum, at the same time it provides protection from externally caused sources of heat and ignition.
September 25, 2025

Contact our Team

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are 100% employee-owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet of paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.