Cross Collaborative Robot Palletizer

The Cross collaborative robot palletizer and depalletizer offers a flexible solution to eliminate repetitive, manual stacking and unstacking tasks. The small footprint makes it ideal for tight manufacturing lines and allows it to adapt to different tasks as needed.

This solution aims to eliminate workers from doing repetitive bending and lifting tasks that can lead to workplace injuries. Staff can then be allocated to higher value decision-based work that is less mundane and can’t be easily automated. See the ROI analysis on how this reduced risk impacts operating expenses.

Cross Easy Palletizing software eliminates the need for complex robotic programming and makes redeploying this solution for a different production line or package size much quicker. 

Current Cross customers report that the payback of their system is less than two years. For multi-shift operations, the payback can be much sooner (see ROI tab for sample calculation). The flexible Cross vertical palletizing and un-palletizing solution will cut your production costs, eliminate ergonomic related injuries, and reduce quality issues.

Palletizing robot with end of arm tooling

Higher Payload Options Available

The Cross robot palletizer is fully customizable and able to accommodate a wide variety of payloads by replacing the robotic arm. The featured arm featured here is a Universal Robot but we are able to swap arms depending on your palletizing needs.

Learn more about Our Palletizer

See our Robot Palletizer in action

Take a look at the Cross collaborative robot palletizer loading boxes onto a pallet from a manual conveyor system setup. This Universal Robot (UR) palletizer is configurable to work in a range of settings, and as seen in our video, has dual pallet capability and can be easily moved when necessary. This solution is based on a Universal Robot arm to create a fully collaborative palletizer.

For more information about implementing a palletizing solution into your operation contact a Cross robotics expert to start a conversation! 

Contact our Team

Hang Tight! We're Searching... Searching... Searching...

We’re looking through thousands of pages to find the most relevant information.

In the meantime, enjoy these fun facts…

Did you know… Cross Company is an ESOP (Employee Stock Ownership Plan). Our ESOP started in 1979 and as of 2006, we are 100% employee-owned! Learn more about our ESOP and how that benefits both team members and our customers.
Did you know... the precision measurement group at Cross was founded in 1939 by our current CEO's grandfather, Jim King. That's a whole lot of calibration!
Did you know... A fingerprint weighs about 50 micrograms. We know, we weighed it! The residue left from a finger can actually make a difference in weight results which is why we wear gloves when we calibrate weights. For reference, a sheet of paper is about 4.5 grams, that’s 4.5 million micrograms.
Did you know… Cross Company has grown significantly since our start in 1954. Over the years we've acquired 26 companies! Today, our five groups have expertise in everything from industrial automation to precision measurement, and industry knowledge going all the way back to 1939.