100% Employee Owned, Founded 1954

855.889.0092

100% Employee Owned, Founded 1954

855.889.0092

100% Employee Owned, Founded 1954

855.889.0092

“NIR Moisture Sensors Improve Dryer Performance” Whitepaper

Andrew Abernathy | January 22nd, 2014

Jeff Morton has 23 years of experience in providing technical services and integration projects to industrial and municipal customers. Jeff has been at Innovative Controls since May of 2001 and worked for Siemens Moore selling Moore APACS Distributed Control Systems prior to that. Jeff started his career working inside sales after graduating from the University of TN in 1990 with a BS in Electrical Engineering.

Below is an excerpt from Jeff’s whitepaper, “Using NIR Moisture Sensors to Improve Dryer Performance.”

“Which Method is Best?

In reviewing all of the requirements for this application, customers should look for a reliable and repeatable measurement that is cost effective, easy to calibrate, non-contacting, and can be easily traversed for real time viewing and historical data archiving. The solution that meets all of these is the Near Infrared Moisture (NIR) sensor.”

Cross Group - Process Control Integration

Case Study: APACS DCS Migration to Siemens PCS 7

Josh Dalzell | November 30th, 2018 An industrial utility service company in Kentucky needed to upgrade and migrate its distributed control system (DCS), which came with a few challenges. DTE Calvert City (DTECC) made the decision three years ago to upgrade their obsolete Process Suite HMI to APACS OS. For 15 years, APACS DCS had been

Read More »
Cross Group - Process Control Integration

How To Evaluate a Systems Integrator for Your Distillery

John Loose | October 30th, 2018 Evaluating a Systems Integrator for upcoming projects is an important part of the project process and the decision typically affects more than one project. This will end up being a relationship that lasts over a number of projects and multiple years. Documentation A well-established documentation system is a key to

Read More »
Cross Group - Process Control Integration

8 Factors For Process Automation Project Success

Robbie Peoples, P.E. | September 24th, 2018 Complex integration projects can present a level of ambiguity even for seasoned project managers. Keeping a close watch on budget and schedule are critical for success, but are not enough to ensure the project is a success in the eyes of a customer. Maintaining customer satisfaction can be the most

Read More »
Scroll to Top