Kawasaki K3VL and K3VLS Series Pumps with Power Shift Control

Rock Able | April 20th, 2017

With today’s ever changing demands on hydraulics and the advent of new Tier 4 engine, the need to vary the input torque of hydraulic pumps becomes evident. When the engine is operating at low idle, available torque is low and can be stalled. Using the Power Shift regulator, input torque to the pump can be limited to prevent engine overload and stalling at varying engine speeds and output power. Optimizing the horsepower input demands of the pump can result in significant savings in fuel consumption and emission output.

Kawasaki Power Shift is a low-cost alternative that maximizes machine versatility and can be retrofit into existing machine design platforms. It reduces fuel consumption, emissions, and noise. Being able to operate at lower RPM with maximum efficiency, a significant reduction in cooling demands and overall machine wear will be realized.

Kawasaki K3VLS Engine Speed | Cross Company

Figure 1

From Figure 1 we can see that as engine speed varies, available output torque varies as well. To prevent engine stall, the input torque requirement of the pump must change accordingly.

Kawasaki K3VLS Engine Torque Curve | Cross Company

Figure 2

A torque limiter with Power Shift allows the pump to always operate at the maximum available torque. The pump can be set for various power levels for improved fuel economy or maximum performance. The pump can be used with an engine speed sensing control (ESS) with the controller monitoring engine droop. Pump input power is reduced to allow the engine to quickly recover preventing overload, at any speed.

Kawasaki K3VLS Torque Limiter | Cross Company

Figure 3

There are currently two versions of Power Shift available to meet system design requirements, electric proportional or hydraulic pilot control.

Kawasaki K3VLS Features | Cross Company

Key benefits of Kawasaki Power Shift:

  • Reduction in emissions
  • Reduction in fuel consumption
  • Reduction in noise emission
  • Reduction in cooling demands
  • Increased machine versatility
  • Longer machine life
  • Can be retrofit to existing platforms
  • Lower implementation cost

Contact Cross Company

Profile picture for user Rock Able

Rock Able


Rock Able is President of Cross Company Mobile Hydraulic & Control Systems and has been with the company for over 34 years. This group assists OEMs in the development of their hydraulic intensive machinery, by supplying them hydraulic components, assemblies and customized control systems.